Security and compliance
Single-tenant servers and networks, audited access, facilities that show evidence, and customer screening under Canadian and US rules. This page sets out each one, and where we stand on certification.
Our approach to GPU cloud security and compliance starts with isolation: the servers you rent are yours alone, and on HGX B300 clusters so are the networks. Around that sit the facilities we choose, how access to your hardware is controlled and recorded, and who we accept as a customer.
Dedicated hardware and networks
Every server we rent is single tenant: no other customer runs on it, and there is no hypervisor between your software and the GPUs.
Single-tenant servers
You rent whole servers. They are never split between customers or shared through virtualization.
A dedicated fabric
On HGX B300 clusters, the east-west fabric between your GPUs is dedicated to you, and so is the north-south network.
Your own addresses
On HGX B300 clusters, dedicated public service addresses and dedicated SNAT addresses, so no other customer's traffic leaves from your IP addresses.
A dedicated fabric means your GPU-to-GPU traffic never shares a switch with another customer's traffic. Dedicated addresses mean that a partner who allow-lists your IP addresses is allow-listing only you.
On HGX B300 clusters built to our delivery specification, the edge adds these protections:
- DDoS scrubbing. Volumetric layer 3 and 4 scrubbing from an established provider, activated through BGP within 5 minutes, at least 1 Tb/s.
- Edge ACLs. Access control lists set to your rules, with changes within one business day.
- Routing security. BGP session authentication, and your RPKI ROAs honored when the edge advertises your own IP space.
- Encrypted drives. If you choose storage nodes for your own storage software, self-encrypting drives are supported.
What we require of facilities
Before we place a cluster in a facility, we ask it for evidence of how it is built and run, not claims.
The evidence belongs to the facility, not to 1Legion. We ask for it with reference numbers, releasable under NDA. A reference number lets a certificate or report be checked with the body that issued it, which a logo on a website does not.
| Evidence | What it shows |
|---|---|
| Tier III design documentation | A design that is concurrently maintainable: power and cooling components can be maintained without shutting down the IT load |
| Uptime Institute certification, stated precisely | Exactly which Uptime Institute certification the site holds, since a design and a constructed facility are certified separately |
| TIA-942 | The site's rating against the ANSI/TIA-942 standard for data center infrastructure |
| EN 50600 | Conformity with the European standard series for data center facilities and infrastructures |
| SOC 2 | An independent auditor's report on the operator's controls |
| ISO 27001 | An information security management system audited against the international standard |
We also ask for contiguous space in a private cage or dedicated hall, 24/7 on-site staffing in place before go-live, and an out-of-band network. The full list of requirements is on our data centers page.
Access control
Access to your hardware is controlled and recorded: out-of-band access is audited, and changes go through written change management.
- Out-of-band access. The management path to a server's BMC, below its operating system, can power-cycle the server, change its firmware and open its console. That is why it is audited.
- Change management. Changes to your cluster follow a written process, so each one leaves a record.
- Inventory and drift detection. An authoritative inventory covers every rack, node, GPU, NIC, drive, switch, port, transceiver and cable, and drift detection flags any difference from the agreed baseline.
These controls are part of our written operating commitments, alongside incident response and hardware fault handling.
Onboarding and screening
We screen every customer under Canadian and US export control and sanctions rules, and the company that will run the servers completes three onboarding forms before any contract is signed.
The three onboarding forms
- Customer Onboarding and Due Diligence: know-your-customer (KYC) information, including the beneficial owners, the people who ultimately own or control the company.
- Export Control, Sanctions and End Use / End User Certification: a signed statement of what the servers will be used for, and by whom.
- Acceptable Use Policy acknowledgment: confirmation that the customer has read and accepts our acceptable use policy.
A broker can pass the forms on, but the end user, the company that will run the servers, signs them.
Screening rules
We screen every customer under Canadian and US rules, including where the ultimate parent company is headquartered.
- Where our servers can be used. No access from, and no results sent to, Cuba, Iran, North Korea, Syria, the Crimea, Donetsk, Luhansk, Kherson and Zaporizhzhia regions, Russia or Belarus.
- Restricted parties. No parties on the OFAC Specially Designated Nationals (SDN) list, the BIS Entity List, the Denied Persons or Unverified lists, or Canada's SEMA or UN sanctions lists. We apply the 50 percent ownership rule: a company owned 50 percent or more by listed parties is treated as listed.
- Parent company. We do not take customers whose ultimate parent is headquartered in China, Hong Kong, Macau, Russia or an embargoed jurisdiction. The rule looks through to the ultimate parent, so it applies even when the contracting company is incorporated elsewhere.
Our certification status
We are working towards SOC 2 and ISO 27001. Our current security documentation is available under NDA.
The SOC 2 and ISO 27001 evidence described above is what we ask of facilities; it is not a statement about 1Legion. To request our documentation, contact us.
Acceptable use
Every customer acknowledges our acceptable use policy before signing, and the policy sets out what our servers may not be used for.
It includes the export control and sanctions rules on this page and explains how we enforce the policy. Read the full acceptable use policy, and see how to buy for where onboarding fits in the contract process.
Questions buyers ask
Where do you stand on SOC 2 and ISO 27001?
We are working towards SOC 2 and ISO 27001. Our current security documentation is available under NDA.
Is our hardware shared with other customers?
No. You rent whole servers that no other customer uses, with no hypervisor. On HGX B300 clusters, the east-west fabric and the north-south network are dedicated to you as well.
Which countries and regions are excluded?
There is no access from, and no results sent to, Cuba, Iran, North Korea, Syria, the Crimea, Donetsk, Luhansk, Kherson and Zaporizhzhia regions, Russia or Belarus.
Do you accept customers whose parent company is in China?
No. We do not take customers whose ultimate parent is headquartered in China, Hong Kong, Macau, Russia or an embargoed jurisdiction.
Can a broker complete the onboarding forms for us?
A broker can pass the forms on, but the company that will run the servers completes and signs them.
Which facility certifications do you ask for?
Tier III design documentation, Uptime Institute certification stated precisely, TIA-942, EN 50600, SOC 2 and ISO 27001, with reference numbers, releasable under NDA. They belong to the facility, not to 1Legion.
Ask for our security documentation
Our current security documentation is available under NDA.